Industrial Anti-Static Mat

Industrial Anti-Static Mat

Industrial anti-static mat factory
Features permanent ESD protection, low compression set, and custom die-cutting. Factory-direct wholesale pricing.
Send Inquiry
 
 
anti static silicone foam parameters
Products name Anti static silicone foam Hardness 5-100 Shore C
Dielectric Strength 107–1011 Ω/sq Color Black/Grey
Products material  Foam silicone  MOQ 100 meter squares
Width

0.5-1.2m or customized

Lead Time 5-15 working days
Length

Any length

usually <20m

Features

Good flame retardancy;waterproof and oil resistant

acid and alkali resistant,aging resistant/good sealing

Thickness 0.8-50mm  Usage

Suitable for sound insulation, shock absorption, noise reduction

and sealing in various scenarios 

anti static silicone sponge1

Advantages of Industrial Anti-Static Mat

 

✅ Surface Resistance: 107–1010 Ω/sq (ASTM D257)

✅ Withstands continuous operating temperatures from -60°C to 230°C without degradation.

✅ Compression set < 5% maintains sealing integrity under prolonged mechanical stress.

Excellent physical and mechanical properties

 

✅Withstands continuous operating temperatures from -60°C to 230°C without degradation.

✅Compression set < 5% maintains sealing integrity under prolonged mechanical stress.

✅Available with high-bond pressure sensitive adhesive (PSA) backing.

✅Fully compliant with RoHS and REACH environmental safety standards.

 

anti static
Property / Parameter Test Method / Standard Typical Value
Material Type Closed-cell / Open-cell Closed Cell Silicone Foam
Surface Resistivity ASTM D257 107–1010 Ω/sq
Density ASTM D1056 0.6 - 0.9 g/cm3
Hardness ASTM D2240 20 - 40 Shore A
Tensile Strength ASTM D412 0.8 Mpa
Elongation at Break ASTM D412 110%
Compression Set ($22\text{h} @ 100^\circ\text{C}$) ASTM D1056 <5%
Continuous Operating Temp Intermittent -40℃-200℃
Thermal Conductivity ASTM C518 W/M.K
Flame Retardancy UL 94 customizable
ESD silicone sponge product inspection

Quality Control & Raw Material Advantages

  Sanpu operates a vertical supply chain across a 13,000 m² production facility, exercising direct control over raw silicone gum formulation and mixing. This upstream oversight eliminates batch-to-batch variation in surface resistivity and physical density. Every production run undergoes rigorous verification inside our climate-controlled testing lab.

 

  We utilize calibrated megohmmeters to map ESD consistency across the entire roll width, mechanical tensile testers to monitor elongation thresholds, and high-temperature aging ovens to simulate long-term field performance. Our strict thickness monitoring systems maintain uniform tolerances across extensive production runs, eliminating assembly alignment failures for downstream tier-1 integrators.

 

Typical Industrial Applications

Electronics Component Assembly: Dissipative work surfaces, automated pick-and-place conveyor linings, and static-safe soldering station mats.

EV Battery Packs: Flame-retardant, anti-static cushioning pads and environmental seals protecting electronic control units from thermal runaway and static discharge.

Semiconductor Processing: Precision die-cut vacuum fixtures, cleanroom static-dissipative gaskets, and test interface damping pads.

Industrial Enclosures: Sealed gaskets for outdoor telecom equipment housings requiring simultaneous dust-proofing, moisture resistance, and ESD shielding.

esd silicone sponge backing adhesive
ESD silicone sponge in Back ahesive
anti static silicone sponge1

FAQ

Is the anti-static performance of this silicone mat permanent or achieved via surface coatings?

 The ESD properties are permanent. Sanpu compounds conductive additives uniformly throughout the raw silicone polymer before vulcanization. The dissipative surface resistivity (107–1010 Ω/sq (ASTM D257)) will not diminish due to friction, solvent cleaning, mechanical wear, or prolonged thermal aging.

What dimensional thickness tolerances can your factory guarantee for custom die-cut parts?

 Our precision die-cutting lines maintain thickness tolerances within for standard profiles and overall dimensional layout tolerances down to . This accuracy eliminates component misalignment inside tight electronic enclosures and automated hardware assemblies.

What is your minimum order quantity for custom dimensions or specific color matching?

 We support engineering prototyping and agile industrial scaling with a low MOQ of 20 square meters for standard configurations. For custom color matching or specialized performance formulations, MOQs are adjusted based on raw compound weight. Contact our sales office for specific project assessments.

 Submit your technical specifications, CAD drawings, or custom sizing requirements directly to our industrial engineering desk today to obtain a factory-direct quotation and secure a production-ready material sample pack.

  

Contact now

 

 

Hot Tags: industrial anti-static mat, China industrial anti-static mat manufacturers, suppliers, factory, anti static silicone foam, Anti Static Silicone Sponge