What are the causes of bubbles in extruded silicone tubes?

Aug 29, 2025 Leave a message

 Extruded silicone rubber is an important brand in compound rubber. However, if not handled properly, bubbles will form in the product during the pipe extrusion processing.

 

 One of the main reasons for the formation of bubbles is that precipitated silica is used as a reinforcing filler. It has a high water content (5% to 8%) by itself, which is difficult to remove completely during production. Moreover, after being made into a mixed rubber, it is prone to absorbing water. The second is that moist air is introduced into the rubber compound during the re-mixing process. The third issue is that the air brought in by the rubber compound during the extrusion process was not promptly discharged.

 

Silicone Sponge Profile

 To solve the bubble problem of extruded pipe rubber (especially prone to occur in winter), multiple measures need to be taken, such as using some special structure control agents to enable them to better react with the hydroxyl groups in silica. At the same time, strengthen the internal mixing process and try to remove water and low-molecular substances from the rubber compound as much as possible. Appropriately increase the plasticity value of the rubber compound to enable it to better expel air bubbles during processing.